RX2 MK2 RECEIVER

Compact and Versatile Programmable Logging Receiver

RX2 MK2 RECEIVER

Small And Versatile

The Scope RX2 Mk2 is a small but versatile POCSAG receiver decoder. It is equipped with 2 individually switchable output relays, a RS232 serial port, microSD card, logging and graphing functionality.

RX2 Mk2 has two zones with relay outputs, a RS232 output and a USB port for programming. There is also a microSD slot with 8Gb card for recording event log data. The card also contains the programming software enabling complete control of the configuration of the unit from a PC and for downloading and analysing the data contained in the log. It is also possible to monitor live incoming data in text and graphical format.

RX2 MK2 RECEIVER

Key Features

  • Receives, monitors and logs POCSAG data
  • Two zone relay outputs, RS232 output, USB programming port
  • MicroSD slot for event logging
  • PC software supplied
  • High quality category 1.5 receiver module, EN 300 220-1 v3.1
  • Frequency range of 430MHz to 470 MHz
  • Power requirement is 12v – 13.8v DC, maximum current draw is 126mA
RX2 MK2 RECEIVER

Specifications​

Power Requirement​

12V – 13.8V DC​

Current​

38mA standby
92mA active serial decoder
126mA active, all relays and sounder​

Signal Format​

POCSAG FSK NRZ (normal/inverted)​

Receiver performance​

Category 1.5, EN 300 220-1 v3.1.1​

Sensitivity​

-117dbm for 1% error​

Blocking​

>-43dbm @ 2MHz
>-33dbm @ 10MHz​

Relay Contact Max Rating​

0.5A @ 125V AC
1.0A @ 60V DC​

Serial Port​

RS232
1200 – 115200 baud rate N81​

See data sheet for full specification

Scope’s policy is one of continuous development and specifications are subject to change without prior notice​