The secure way to link multiple fire systems
Where buildings are in proximity, a fire in one can affect the other buildings. An F-Link 4 radio mesh network system connects the fire control panels in all nearby buildings together.
Therefore, a fire in one building is reported to all, with each F-Link 4 node indicating where the alarm came from. Scope’s Digimesh™ signalling technology provides robust performance and on-going reliability.
Instant text data direct to handheld receivers
Connexions forwards fire control panel events and pre-alarm information directly to fire marshals’ handheld receivers, thereby avoiding the need to go back to the fire control panel. This saves precious time in the event of a false alarm, prevents disruption and can save considerable costs caused by productivity downtime.
Software interfaces are available to operate with most popular analogue addressable fire systems.
PageTek Pro 2
Alerting the hearing impaired to a fire alarm
PageTek Pro 2 is a well-established self-monitoring transmitter, which in the event of a fire, alerts the hearing impaired using a personal-issue pocket receiver. This vibrates and indicates the emergency on-screen.
For residential occupants, a Nightstand cradle & pillow vibrator is also available.
Used widely in workplaces, schools, colleges, and public buildings.
Equipped with 5 or 10 programmable inputs
A highly versatile switched input transmitter with a myriad of uses, often deployed to monitor conventional control panel activation & door monitoring. Each input can be programmed with predefined messages for onward transmission to handheld receivers carried by fire marshals or security personnel.
Volt-free or voltage input triggers
Scope DigiLink transmitters have either 5 or 10 programmable zone inputs. Primarily used with the RX10 receiver, it provides a one-way telemetry link between control panels and other devices. Each zone can also be programmed with a predefined message, which when triggered, will automatically send the active zone message to radio pagers.
Switched relay expansion unit for F-Link4 System
The perfect addition to your F-LINK4 system. The F-Link XP provides switched relay output notification from the F-Link4 Master unit to the Master Fire Control Panel, indicating which F-Link Node has gone into alarm.
The standard unit has 15 output relays, which can be expanded to 30 relays with an additional relay board.
Fixed radio panic buttons
Designed for wall or under-desk mounting, the PB1 and PB2 send a repeating signal when activated, until reset with a key. PB1 has a single front mounted button, PB2B has a button each side which should be pressed simultaneously to activate. Powered by a single 9V PP3 battery, the latest MK2 version provides 25 mW RF output power and features a programmable “Listen Before Transmit” mode, ideal for noisy radio-traffic environments.
Wave Track 4
A Rapid & Flexible Solution for alerting mobile staff
It's fixed, it's portable, it's re-programmable, it's relegendable, its use is only limited by your imagination. The Scope 4 button Wavetrack transmitter is a perfect solution for alerting mobile personnel with predefined messages sent to pocket receivers. Multiple or single units can be deployed as required.
Wave Track’s 25mW RF output power provides ranges of 200+ metres line of sight.
Mobile Personal Alarm with Fall & Man-Down sensor
The Scope MPA personal pendant is just as suitable for Healthcare Workers as it is for elderly and vulnerable patients. It is extremely easy to use, even by people with arthritic hands and other disabilities. A single button-press summons help direct to mobile pocket receivers. A programmable Fall and Man-Down function completes the picture.
Provides a one-way UHF radio link between fire or intruder panels
The basic T-Link is a pre-configured 5-Zone, ‘off-the-shelf’ one-way radio link intended to connect remotely located fire panels, or intruder panels.
Ideal for wirelessly connecting remote buildings, or areas separated by roads.
Receiver Decoder with 10 remotely switchable relay outputs
The perfect telemetry link. All 10 zones have an individual relay output which can be set for latching, momentary or change of state. There is also a configurable common relay and an RS232 serial data output.
RX2 Mk2 Receiver
The Scope RX2 Mk2 is a small but versatile POCSAG receiver decoder
It is equipped with 2 individually switchable output relays, an RS232 serial port, microSD card, logging and graphing functionality.
The EPOC-S heralds the beginning of a new era in critical response communication
Rugged IP67 rated two-way messaging alerter with Man-Down and SOS transmit functions. Large multi-colour screen can be programmed to provide colour-coded alerts. Manual and auto acknowledgement of messages provide reassurance when used in hostile environments.
A10 is the latest version of the best-selling Scope GEO40 personal messaging receiver
8 addresses, multiple vibrate patterns, tactile Out of Range and Low Battery alerts, frequency programmable.
Conveniently Rechargeable via USB
Four button operation with icon driven menu options make the GEO 28V3 pager quick and easy to use.
The Big Screen pager alternative
With its large easy-read display, icon-driven menus and simple operation, it is used in a wide diversity of applications, from supermarkets to nursing homes.
The choice of aerial depends on the installation environment and the type of connection on the equipment.
The type and location of the aerial is normally the most important part of any radio installation. Bigger and higher is not always better! Speak to our technical team for advice.
All the features of the EPOC-S, with added Bluetooth and GPS modules for location and tracking.
The holy grail of critical messaging, a two way messaging device which also provides Indoor & Outdoor Location and Tracking.
Ideal for use by lone workers on construction sites, large industrial premises, specialist care establishments and agri-food businesses.
Rechargeable when used with CNS Nightstand
AA size battery powered version of the popular GEO 87Z pager, with added functionality when used with the CNS Nightstand, making this the ideal pager for use with the Pagetek Pro system
A range of accessories are available, including pager straps, holsters and protective covers.
Also battery backup kits and plugtop power supplies.